Client project
Bikestow
Controller and machine integration
Controller electronics, motor-drive integration, sensing, and wiring for an automated machining system.
View case studyWhat we do
Circuit design, PCB layout, and hardware bring-up for embedded products and electromechanical systems — developed with close attention to physical enclosure constraints and firmware integration.
Relevant case studies
University teaching project
Strain-wave gear demonstrator
Motor and driver integration
Motor-drive hardware integrated with a physical teaching demonstrator and checked on the bench before final assembly.
View case study
Personal project · In progress
SendSpin speaker
Custom PCB, moving into assembly
A Bluetooth speaker built around a custom PCB, laid out and routed from scratch with particular attention to supply filtering.
View case study
Personal project · Concept
Auto-ranging datalogger concept
Parked as a concept
An ESP32-based current/voltage datalogger, exploring auto-ranging across a wide measurement span — never taken to completion.
View case study
Personal project
Rotating assembly test rig
Strain gauge and DAQ instrumentation
A strain gauge and Arduino Nano DAQ built to measure stepper motor speed-torque curves under controlled load.
View case studyScope
Engineering scope spans schematic capture, PCB layout, component selection, power regulation, sensor and actuator drive circuits, prototyping, and structured bench bring-up. For electromechanical devices, board geometry, mounting features, thermal management, connector placement, and harness routing are designed in tandem with the mechanical enclosure rather than forced into available space afterward.
Developing the supporting firmware alongside hardware design allows for immediate bench validation during bring-up, ensuring signals, power rails, and peripheral interfaces perform reliably under real-world conditions.
Prototype board with a wireless microcontroller module, mid bring-up.
Display module wired to a custom controller board.
Sensor readhead mounted to a linear motion platform.
Motor and driver electronics set up on the bench.